How to Run a Ping Test on Windows 10: A Step-by-Step Guide

What is a Ping Test?
A ping test checks the network connection between your computer and a target device (IP address or domain).
It helps diagnose connectivity issues, measure latency, and identify packet loss.
How to Run a Ping Test
Open Command Prompt as administrator by typing "cmd" in the search bar and selecting Run as administrator.
Use the command `ping <target address>` (e.g., `ping google.com`) to send packets and check connectivity.

Understanding the Results
Reply from [IP address]: Successful connection.
Time [x]ms: Round-trip time for the packets (lower is better).
Request Timed Out: The target device didn't respond (could indicate network issues).
Packet Loss: Some packets failed to return, indicating possible network problems.
Advanced Ping Test Options
-t: Continuous ping test until manually stopped.
-n [number]: Specify the number of pings.
-l [size]: Set the packet size.
-4/-6: Use IPv4 or IPv6.
Using Ping for Network Troubleshooting
Ping your router (e.g., `ping 192.168.1.1`) or another device on the local network.
Use ping results to identify network issues like high latency, packet loss, or unreachable targets.

Common Issues
Request Timed Out: Indicates the target isn't responding or a network issue.
Destination Host Unreachable: The target device or network isn't reachable.
Packet Loss: Network congestion or faulty hardware might be causing the issue.

By performing a ping test and analyzing the results, you can troubleshoot network problems effectively and improve your overall connectivity.